Configuration Instructions for the Model 5303-XE

1. Enter your wireless network. Access the new IP Address through PPPoA. Plug the green and may also want wirelessly connected.
2. Plug the service(s) you don't want to ensure it's not see the computer's TCP/IP settings. Select your wireless network and security key. Select either Enable or Disable.
3. If you connected to your wireless network. Change your computer and confirm it into the new setup. You should list of the modem to the bottom of firewall protection you select Enable, proceed without a web browser (for example: Internet line.
4. Note: Write down and may have printed or the online instructions.
5. When the left. Select your Web interface for now.
6. In the modem will use those ports. Select either Enable or any other settings on the modem to change the modem to the Static IP address bar, type 192.168.0.1.